Filter
Top Products
44
Answering an Intercom Page
When the intercom page tone sounds, the display shows the ID of the sta-
tion that is paging.
From the handset, press
[ /ash] or [xfer/intercom]. If AutoTalk is on,
the handset automatically answers the page when you remove the hand
-
set from the cradle.
From the DCT7565 base, press
[int’com/xfer], or [speaker].
To hang up an intercom page from the handset, press
[ ]. To hang up an intercom page from the DCT7565 base,
press
[int’com/xfer].
Room/Baby Monitor
This feature allows you to monitor sounds in another room. Place a hand-
set (or the DCT7565 base) in the room you wish to monitor; it will func
-
tion as a microphone. Another station can be set to function as a remote
speaker, allowing you to monitor sounds in the room.
Press
[menu/clear] and enter the ROOM MONITOR menu. TO
ROOM MONITOR appears.
Select the station you want to monitor by
using [ ] or [ ].
Press . ROOM MONITOR appears, and you hear
sounds in the room where the station is installed.
To turn off the Room Monitor, press
[ ] or return
the handset to the cradle.
1.
2.
3.
4.
Handset #1
near child
Handset #2
at remote location
One-Way Broadcast
Handset #1
near child
Handset #2
at remote location
One-Way Broadcast