Filter
Top Products
40
Transferring a Call
You can transfer a call from one station to another.
From the base - DCT7565 only From the handset
During a call, press
[int’com/xfer].
The call is automatically placed on hold.
Select the handset you want to talk with
by pressing
[1] to [4]. To page all the reg-
istered handsets, press
[*/tone]. A paging
tone sounds. To cancel the transfer, press
[int’com/xfer] or [speaker].
When another station accepts the trans
-
ferred call, you will be disconnected. If
you want to rejoin the call, press
[speaker] again.
1.
2.
3.
During a call, press
[xfer/intercom].
Use
[ ] or [ ] to select the station you want to trans-
fer the call to, then press
. The call will
be automatically be placed on hold, and a paging tone
sounds. To cancel the transfer, press
[ /ash] or [ ].
When another station accepts the transferred call, you
will be disconnected. if you want to rejoin the call,
press
[ /ash] or [ ] again.
1.
2.
3.
Answering a Transferred Call
When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging.
To accept the call transfer:
Press [ /ash] or [xfer/intercom] from the handset or [int’com/xfer] or [speaker] on the DCT7565 base.
To speak to the caller, press
[ /ash] on the receiving handset or [speaker] on the DCT7565 base.
Only the rst station to answer the transfer page will be connected to the call. If the transfer page is not
picked up within one minute, the operation will be canceled.
1.
2.
3.