Filter
Top Products
26
keypad to enter a name for this entry; the name can contain up to 16 characters. (See page 12 for entering
text instructions.) If you do not want to enter a name for this entry, your phone stores this entry as <No
Name>. Press
when you are nished.
Enter the number for this entry (STORE/EDIT NO.). Once you have stored a name, STORE/EDIT NO.
appears. Use the number keypad to enter the phone number; the phone number can contain up to 20 digits.
If you need the phone to pause between digits when it’s dialing (for example, to enter an extension or an
access code), press
[redial/pause] to insert a two-second pause. A P appears on the display. You can also
use more than one pause together if two seconds is not long enough. Each pause counts as one digit.
Assign a personal ring tone for this entry (PERSONAL RING). You can attach a personalized ring tone to
each phonebook entry; the phone uses this ring tone when this person calls. See page 31 for a selection list.
Move the cursor to select one of the 20 different ring tone options. As you select each ring tone, a sample of
that tone sounds. When you hear the ring tone you want to use,
press
.
If you do not want to use a personal ring tone for this phonebook
entry, select the NO SELECTN option, and the phone uses your
standard ring tone setting.
Your phone handset has 10 speed dial numbers,
[0] to [9]. Move
the cursor to select the speed dial number you want to assign to
this phonebook entry, and press
. Select
NO SELECTN if you do not want to assign this entry to a speed dial
number.
A tone sounds conrming that the new phonebook entry has been stored,
and DONE!
appears the display.
5.
6.
7.
8.