Filter
Top Products
39
Using Hold, Conference, and Transfer
Placing a Call on Hold
During a call, press [xfer/intercom] on the handset (or [hold] on the DCT7565 base) to place the caller on
hold. If you leave a caller on hold for more than ten seconds, the display screen will read LINE ON HOLD.
To return to the party on hold, press
[ /ash] or [ ] on a handset or [speaker] on the DCT7565 base. The
phone returns to the holding party.
Notes:
You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party’s line is disconnect
-
ed and the phone returns to standby.
While a call is on hold, Caller ID and Call Waiting can not be used.
Conferencing
If you have more than one handset, up to three people can participate in a conference call on the DCT756 and up to
four people on the DCT7565. A three-way conference call consists of an outside line and two handsets. A four-way
conference call consists of one outside line, two handsets, and the base speakerphone. You can easily join a call al
-
ready in progress.
Press [ /ash] or [ ] on the handset or [speaker] on the DCT7565 base to join the call.
To hang up, return the handset to the cradle or press
[ ] on the handset. From the base, press [speaker].
The other station will still be connected to the call.
1.
2.
•
•
1.
2.