Filter
Top Products
15
If you don’t have a standard wall plate, you can mount your phone directly to
the wall. Before doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the mounting loca
-
tion that could cause a hazard when inserting screws into the wall.
Try to mount your phone within 5-feet of a working phone jack to avoid
excessive wire lengths.
Make sure the wall material is capable of supporting the weight of the
base and handset.
Use #10 screws with a minimum length of 1-3/8 inches, with anchor-
ing devices suitable for the wall material where the base unit will be
placed.
Insert two mounting screws into the wall, using the appropriate anchor
-
ing device, 3-15/16 inches apart. Allow about 1/8 inch between the
wall and screw heads for mounting the phone.
Refer to the steps on page 14 to complete the mounting process.
•
•
•
•
1.
2.
Direct Wall Mounting (DCT7565 Only)