Filter
Top Products
35
Using Caller ID, Call Waiting
If you subscribe to Caller ID from your phone company, your phone shows you the caller’s phone number and name
(if available) whenever a call comes in. If you subscribe to both Call Waiting and Caller ID, the phone also shows you
the name and the number of any call that comes in while you’re on the line.
Using the Caller ID List
You can store up to 100 Caller ID numbers in each handset. Your phone shares memory between your Phonebook
and Caller ID entries. Once you reach your maximum phonebook entries of 100, Caller ID information will not be
stored (but it will still display when the call comes in).
To open the Caller ID list, press
[ ] (on the right side of the four-way key). The phone shows the total number of
stored Caller ID records. Use
[ ] or [ ] to scroll through the list, or enter a letter on the keypad to jump to the rst
caller ID name that starts with that letter.
Making a Call from a Caller ID Record
When the phone is in standby, press [ ] to open the Caller ID list.
Use [
] or [ ] to nd the Caller ID record you want to dial.
To add (or delete) a “1” at the beginning of the displayed phone number, press
[*/tone/<]. To add (or remove)
the stored area code to the displayed phone number, press [#/>].
Press
[ /ash] or [ ] to dial the number.
Note: You can also press
[ /ash] before you open the Caller ID list. When you come to the phone number
you want to dial, press
.
Deleting Caller ID Numbers
To delete only one Caller ID number, go to the Caller ID list and select the number you want to delete. Press
[menu/clear]. When the phone asks you to conrm, select YES.
To delete all the Caller ID numbers, press
[ ] (on the right side of the four-way key) and then [menu/clear]. Select
YES when asked if you want to DELETE ALL.
Warning: When you delete a Caller ID number, you delete it permanently.
1.
2.
3.
4.