Filter
Top Products
54
Uniden MHS550 Radio Owner’s Manual
memory stored channels are retained so that upon turning
the radio on again, they are immediately available.
Scanning (Memory Preset Station Tuning) in the
AM, FM, and Aircraft Bands
As you can store up to 25 frequencies in each of the other
bands, you can also move from one stored frequency
(station) to the next in each band. You cannot set presets
that cross from one band to another.
To tune to memorized Station Presets that you have
stored, that are valid station frequencies, briey press
SCAN/MEM. Memory and Scan appear in the display.
If you inadvertantly store three FM frequencies for
which there are no stations in your area, no presets
will be available.
Repeatedly press ▲ to move from the rst stored
frequency to the second and so on.
If you press ▼, an error tone sounds. If you want to
remove a frequency from memory, when you press
▲ and that frequency is displayed, press and hold
SCAN/MEM until the double beep sounds. Memory
disappears from the display and the frequency is
removed from memory. It is no longer available for
that session.
Note: if no frequencies have been stored and you
press SCAN/MEM, an error tone sounds.
1.
2.
3.