Filter
Top Products
60
Symptom Suggestion
Severe noise interference.
Keep the handset away from microwave ovens, computers, remote
control toys, wireless microphones, alarm systems, intercoms, room
monitors, uorescent lights, and electrical appliances.
Move to another location or turn off the source of interference.
•
•
The Caller ID does not display.
The call was placed through a switchboard.
Call your telephone provider to verify your Caller ID service is current.
There may be a problem with your Caller ID service.
•
•
The handset doesn’t ring or
receive a page.
Make sure that you are not too far from the base.
Charge the battery in the handset for 15 to 20 hours by placing the
handset on the base or charging cradle.
Change the Digital Security Code (see
Changing the Digital Security
Code on page 58).
•
•
•
You cannot register the handset
at the base.
Charge the battery pack in the handset for 15 to 20 hours.
Change the Digital Security Code (see
Changing the Digital Security
Code on page 58).
•
•
The handset doesn’t
communicate with other
handsets.
Change the Digital Security Code (see
Changing the Digital Security
Code on page 58).
Make sure that you have registered all handsets (see
Registering
Accessory Handsets on page 19).
•
•
An extra handset can’t join the
conversation.
Make sure there are not two handsets already using the conference
feature.
Make sure that another handset is not in privacy mode.
•
•
Room Monitor does not work. Make sure to place the handset(s) within the range of the base.
•