Filter
Top Products
37
Privacy Mode
If you don’t want other stations to interrupt your call, turn on privacy mode. As long as your handset is in privacy
mode, other stations can’t join your call or make any calls of their own: their displays will show UNAVAILABLE.
While on a call, press
[menu/clear].
Move the cursor to PRIVACY MODE, and then press
[select/ ]. PRIVACY MODE ON will appear in the
display for 2 seconds. A “P” icon will remain in the display for as long as privacy mode is on.
To turn privacy mode off, repeat the procedure listed above.
Seven-Digit Dialing
If you can make a local call by dialing only 7 digits (instead of 10), you can program your local area code in your
phone. Calls that come from within your area code will show only the 7-digit phone number; calls from outside your
area code will show all 10 digits. To enter an area code, follow the steps below:
Press
[menu/clear]. Select the GLOBAL SETUP menu, and then the AREA CODE submenu.
Use the number keypad (
[0] through [9]) to enter a 3-digit area code. If an area code has already been
stored, it appears in the display. Press
[menu/clear] to delete the stored code, and then enter a new one.
Press
[select/ ]. You will hear a conrmation tone.
1.
2.
1.
2.
3.