Filter
Top Products
34
Using Hold, Conference and Transfer
Placing a Call on Hold
To place a caller on hold, press [xfer/intercom] on the handset, [hold] on the base. If you leave a caller on hold for
more than ten seconds, the display will read, LINE ON HOLD in the handset display.
To return to the party on hold, press
[ /ash] or [ ] on a handset or [speaker] on the base.
Note: You can only place a caller on hold for 5 minutes. Once 5 minutes have passed, the caller will
be disconnected and the phone will return to standby.
While a call is on hold, Caller ID and Call Waiting can not be received.
Conferencing
If you have more than one handset, up to four people can participate
in a conference call. A three-way conference call consists of an
outside line and two stations. A four-way conference call consists of
an outside line, the base speaker phone, and two handsets. You can
easily join a call already in progress.
From the handset, press
[ /ash] or [ ] to join the call. From the
base, press
[speaker]. You can hang up normally; the other station
will still be connected to the call.
Outsidecall
Handset#1
Handset#2
Base
Outsidecall
Handset#1
Handset#2
Base