Filter
Top Products
12
Installing the Phone
Choosing the Best Location
When choosing a location for your new phone, here are some important guidelines you should consider:
The location should be close to both a phone jack and a power outlet that is not controlled by a wall switch.
The base and handset should be kept away from sources of electrical noise such as motors, microwave
ovens, and uorescent lighting.
Don’t place the base in direct sunlight or subject it to high temperatures. The battery may not charge properly.
For better reception, place the base as high as possible.
The base should be placed in an open area for optimum range and reception.
If your home has specially wired alarm equipment connected to a phone line, be sure that installing the
system does not disable your alarm equipment. If you have questions about what will disable alarm
equipment, contact your telephone company or a qualied installer.
Wall Mounting the Base
This phone can be mounted on any standard wall plate.
Snap the wall mount adapter into the notches on the base top.
Plug the AC adapter into the DC IN 9V jack.
CAUTION: To avoid risk of re and shock, only use the Uniden
AD-800 AC adapter.
Wrap the AC adapter cord inside the molded wiring channel as shown.
Plug the AC adapter into a standard 120V AC wall outlet. DO NOT use an
AC outlet controlled by a wall switch.
•
•
•
•
•
•
1.
2.
3.
4.