Filter
Top Products
20
Registering DCX730 or DCX750 Handsets
To register DCX730 or DCX750 handsets, simply place the accessory
handset in the base. While the handset is registering, HANDSET
REGISTERING will appear in the LCD. When REGISTRATION
COMPLETE is displayed, the handset has been registered to the base.
If REGISTRATION FAILED appears, remove the handset from the base
and try again.
Registering DCX640 or DCX700 Handsets
On the base, press and hold [ash] until the CHARGE LED starts
to blink.
On the handset, press and hold
[#/ ] until you hear a beep.
While the handset is registering, HANDSET REGISTERING
appears in the display. When the display shows REGISTRATION
COMPLETE, the handset has been registered to the base. If
REGISTRATION FAILED appears, please try these steps again.
Resetting Handsets
If you want to register the handset to a different base or replace a
handset with another one, you must rst clear the registration information
from the base and the handset.
Press and hold
[ ] and [#/ ] for at least 5 seconds, until the SYSTEM
RESET menu appears.
Select the DEREGISTER HS submenu. WHICH HANDSET? appears in
the display.
Use
[ ] and [ ] to select the handset ID you want to de-register, and
then press
[select/ ]. DEREGISTER HS appears.
When the phone asks you to conrm, move the cursor to select YES, and then press [select/ ]. You will
hear a conrmation tone.
1.
2.
3.
1.
2.
3.
4.
Which Handset?
Handset #1
Handset #2
Which Handset?
Handset #1
Handset #2