Filter
Top Products
44
From the base From the handset
Press
[menu/clock] six times.
The current setting (“E” English, “F” French,
or “S” Spanish) appears on the base, and it is
announced (“English” English, “Français” French,
or “Español” Spanish).
Press
[ /select] or [ /select] to select the
language.
Press
[set]. A conrmation tone sounds, and
the system announces the new setting in the
selected language.
1.
2.
3.
4.
Press
[menu/clear]. Select ANSW. SETUP, and
then the LANGUAGE submenu.
Move the cursor to choose ENGLISH,
FRANÇAIS (French), or ESPAÑOL (Spanish).
Press
[select/ ]. You will hear a conrmation
tone.
1.
2.
3.
Setting the Number of Rings
The ring time setting allows you to set the number of rings the caller hears before your answering system plays the
outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver (TS)
setting, the answering system picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can hang up after the second ring to
avoid long distance billing charges.
From the base From the handset
Press
[menu/clock] three times. The base
displays the current number of rings (2, 4, 6, or
TS for toll saver) and announces the setting.
Press
[ /select] or [ /select] until the
desired ring time appears.
Press
[set]. A conrmation tone sounds, and the
system announces the new ring time.
1.
2.
3.
Press
[menu/clear]. Select the ANSW. SETUP
menu, and then the RING TIME submenu.
Move the cursor to select a ring time (TOLL
SAVER, 2 TIMES, 4 TIMES, or 6 TIMES).
Press
[select/ ]. You will hear a conrmation
tone.
1.
2.
3.