Filter
Top Products
38
Using the DirectLink™ Communication Feature
Using the DirectLink two-way communication feature, a pair of handsets can function as two-way radios. DirectLink
communication does not interfere with the base’s ability to make or receive telephone calls. You must set both
handsets to use DirectLink communication before they can call each other. Other handsets can be used while two
handsets are using DirectLink communication; however, the two handsets using DirectLink communication are not
able to make or receive calls until the operation is canceled.
Press
[menu/clear] and move the cursor to the DIRECTLINK MODE menu.
Press
[select/ ]. The display shows TO ENTER DIRECTLINK MODE PRESS
[SELECT].
Press
[select/ ]. You will hear a conrmation tone, and DIRECTLINK MODE
COMPLETE appears in the display.
Making a DirectLink™ Call
To call another handset with DirectLink communication, press [ /ash]. The
display shows TO DIRECTLINK A HANDSET PRESS [1-4].
Press the number of the handset you want to call. If the handset is out of range
or not set to DirectLink communication, the display shows UNAVAILABLE.
To answer a DirectLink call, press
[ /ash]. (If Any Key Answer is on you can also press any key on the
twelve-key dialpad.) To end the call, press
[ ].
Exiting DirectLink™ Communication
While the handset is using DirectLink communication, the display shows DIRECTLINK
MODE; this means the handset cannot make or receive normal phone calls. To exit
DirectLink communication and return to normal standby, simply return the handset
to the cradle, or press
[menu/clear] followed by [select/ ]. DIRECTLINK MODE
CANCEL appears in the display.
1.
2.
3.
1.
2.
3.
To DirectLink
a handset
press [1-4]
To DirectLink
a handset
press [1-4]
SUN
Handset
DirectLink Mode
SUN
Handset
DirectLink Mode