Filter
Top Products
25
If you select ALL MEMORY, ARE YOU SURE? appears on the display screen. Move the cursor to select YES,
and then press
[select/ ].
If you select ONE MEMORY, nd the phonebook entry you want to transfer and then press [select/ ].
The phonebook entries will be transferred to the designated handset. During the copy process, the receiving
handset shows RECEIVING and the banner of the sending handset.
When the transfer is completed, DONE! appears on the handset.
Note: If your phonebook contains 100 entries, you cannot store any new phonebook entries. You will
hear a beep, and MEMORY FULL appears on the display. If the selected handset is out of range or
data transfer is canceled, UNAVAILABLE appears in the display. Phonebook listings will not be
transferred.
Customizing Your Phone
Changing the Handset Banner
Each handset will display a banner name once it is registered to the base. The default banner is Handset #1,
Handset #2, etc. You can change the name your phone displays by changing the banner display. If you have more
than one handset, the banner name identies your handset during handset-to-handset functions like intercom and
DirectLink™ communication. The name will be displayed on the LCD screen during Standby, Intercom, Intercom
Hold, Room/Baby Monitor, and Copy Phonebook operations. The banner name will be displayed on the receiving
handset as well.
Press
[menu/clear].
Select the HANDSET SETUP menu, and then the BANNER submenu.
Use the keypad to enter or edit the banner name. (See
Entering Text from
Your Handset on page 11 for detailed instructions on entering text.)
Press
[select/ ]. You will hear a conrmation tone.
5.
6.
7.
8.
1.
2.
3.
4.