Filter
Top Products
4 - English
Connect the Power and Telephone Cords
Connect the base AC adapter to the
AC IN 7.8V
jack and the telephone cord to the
TEL LINE
jack. Route the cords as shown:
For desktop use For wall mount use
WALL
DESK
DESK
WALL
WALL
DESK
WALL
DESK
Plug the AC adapter into a standard 120V AC power outlet, and connect the
telephone cord to a standard telephone wall jack.
If you are mounting the phone on the wall, place the mounting slots over the pins
on the wall plate; slide the base down to lock it into place.
Test the Connection
Pick up the corded handset from the base. You should hear a dial tone and the
display on the base should say
Talk
. When you get a dial tone, make a quick test call.
If... Try...
the display says
Check TEL Line
or
you don’t hear a dial tone
checking the connection between the
base and the phone jack.
you keep hearing a dial tone changing to pulse dialing.
Changing to Pulse Dialing
Your phone uses tone dialing by default. If your phone company uses pulse dialing,
you need to change your phone’s dial mode.
Press
Menu
and choose
Global Setup
.
Select
Dial Mode
then
Pulse
. You’ll hear a confirmation tone.
To send DTMF tones during a call (e.g., for an automated response system), press
*
to temporarily switch to tone dialing. When you hang up, the phone automatically
returns to pulse dialing.
1.
2.
3.
1.
2.