Filter
Top Products
English - 3
GETTING STARTED
Set Up the Base
Attach the Stand
Before you attach the stand, you have to decide if you want the phone to rest on a
desk or hang on a wall.
For desktop use
Turn the stand so the word
DESK
is right-side
up (it will be on the left).
Insert the tabs into the notches marked
DESK
at the top of the base.
Slide the stand up until it snaps into place.
For wall mount use
Turn the stand so the word
WALL
is right-side
up (it will be on the left).
Insert the tabs into the notches marked
WALL
at the bottom of the base.
Slide the stand down until it snaps into place.
To Remove the Stand
Pull the locking tabs up and back. Then, slide the stand straight off the opposite
direction you put it on.
Connect the Corded Handset
Use the coiled cord to connect the corded handset to the connector on the left side
of the base.
For wall mount use only
On the front of the base, pull the clip
(that holds the corded handset in place) out
of its slot.
Rotate the clip 180 degrees.
Flip it from front to back and slide it back
into the slot.
1.
2.
3.
1.
2.
3.
1.
2.
3.
WALL
DESK
DESK
WALL
WALL
DESK
DESK
WALL
WALL
DESK
WALL
DESK
WALL
DESK
WALL
DESK