Filter
Top Products
55
Troubleshooting
56
When you have this
problem...
Try...
A station can make calls, but
it doesn’t ring or receive a
page.
Making sure the ringer isn’t turned off (see page 37).
•
During power failure, can’t
make or receive a call.
Making sure to use the base corded handset to make or receive a call (see page
31).
Checking the telephone cord connection (see page 9).
•
•
Severe noise interference.
Keeping all handsets away from microwave ovens, computers, wireless LAN
station, remote control toys, wireless microphones, alarm systems, intercoms,
room monitors, uorescent lights, and electrical appliances (see page 5).
Moving the base to another location or turn off the source of interference.
•
•
The Caller ID does not
display.
Checking to see if the call was placed through a switchboard.
Asking your telephone company to verify your Caller ID service is current. There
may be a problem with your Caller ID service.
•
•
I can’t register the handset at
the base.
Charging the battery for 15 to 20 hours.
Resetting the handset (see page 56).
•
•
The handset doesn’t
communicate with other
handsets.
Register all handsets to the same base, and then select the same base on all
handsets (see pages 13 and 14).
•
I can’t join the conversation.
Checking to see that there are not two cordless handsets already using the
conference feature (see page 39).
Checking to see that another station is not in privacy mode (see page 41).
Register all handsets to the same base, and then select the same base on all
handsets (see pages 13 and 14).
•
•
•
The answering system does
not work.
Checking the AC adapter connection (see page 8).
Checking to see if the answering system is turned on (see page 48).
•
•
UC517BH(DECT2088) book OM 2.indb55 55 1/9/2008 11:08:06 AM