Filter
Top Products
13
Installing the Phone
14
Using Multiple Bases
The handsets supplied with your phone (or any DCX200 accessory handsets) can be registered to a total of four
different bases. Compatible bases include the DECT2060, DECT2080, DECT2085, DECT2088, and DECT3080
models. Once your handset is registered to more than one base, you can set the handset to search automatically the
available base, or you can select manually which base the handset should connect to (for example, if you have one
base with an answering machine, you can tell the handset to connect that base to check messages).
Registering the Handset to Another Base
Make sure the handset battery is fully charged.
To register a handset to DECT2060, DECT2080 or DECT3080 base:
Disconnect the base AC adapter. Then press and hold
[nd hs] or [nd] while you reconnect the adapter.
Keep pressing
[nd hs] or [nd] until the charge LED starts to blink.
To register a handset to DECT2085 or DECT2088 base:
With the phone in standby, press
[Menu/Select] on the base. Move the cursor to select the REGISTER
HANDSET menu, and then press
[Menu/Select]. HANDSET REGISTERING will appear.
On the handset, Press
[Menu/Select]. Select the REGISTER BASE menu. HANDSET REGISTERING will
appear in the display.
Wait approximately thirty seconds. “REGISTRATION COMPLETE” will be displayed to indicate the handset has
been registered to the base and a handset ID will be automatically assigned.
If the display shows REGISTRATION FAILED, repeat the process again.
1)
2)
•
•
3)
4)
UC517BH(DECT2088) book OM 2.indb13 13 1/9/2008 11:07:36 AM