Uniden DECT2088 Series Cordless Telephone User Manual


 
26
Setting Up the Phonebook
Each station has its own separate phonebook that holds up to seventy names and numbers. When a station’s
phonebook is full, the station beeps and shows MEMORY FULL on the display. You cannot add any names and
numbers in that station’s phonebook until you delete some of the existing ones.
You can also use the phonebook entries to store a group of numbers (up to twenty digits) that you may need to enter
once your call connects. This is referred to as chain dialing. (See Chain dialing from the phonebook on
page 33.)
Creating Phonebook Entries
To store names and numbers in your phonebook, please follow these steps:
With the phone in standby, press [ ] (on the left side of the four-way key).
To create a new phonebook entry, press
[Menu/Select]. Select the
CREATE NEW menu. EDIT NAME appears.
Enter the name for this entry (EDIT NAME).
Use the keypad to enter a name for this entry; the name can contain up to sixteen characters. (See Entering
Text from Your Phone on
page 23 for instructions on entering text.) If you do not want to enter a name for this
entry, your phone will store this entry as <NO NAME>. Press
[Menu/Select] when you are nished.
Enter the number for this entry (EDIT NUMBER).
Once you have stored a name, EDIT NUMBER appears next. Use the
number keypad to enter the phone number; the phone number can contain
up to twenty digits. If you need the phone to pause between digits when it’s
dialing (for example, to enter an extension or an access code), press
[Redial/
Pause] to insert a two-second pause. You will see a P in the display. You can
also use more than one pause together if two seconds is not long enough.
Each pause counts as one digit. Press
[Menu/Select] when you are nished.
1)
2)
3)
4)
Setting Up the Phonebook
UC517BH(DECT2088) book OM 2.indb26 26 1/9/2008 11:07:47 AM