Filter
Top Products
35 36
36
Using Caller ID, Call
Waiting, and Redial Lists
Using Call Waiting
If you have Call Waiting service and a second call comes in when you are on the
phone, a call waiting tone will sound. If you also have Caller ID service, the phone
shows the Caller ID information for the incoming call. Press
[ /Flash] on the handset
or
[Flash] on the base to accept the waiting call. There is a short pause, and then
you will hear the new caller. To return to the original caller, press
[ /Flash] on the
handset or
[Flash] on the base.
Note: You must subscribe to Call Waiting service for this feature to operate. Not all features are available in all areas.
Redialing a Number
You can quickly redial the last ve numbers dialed on each station.
With the phone in standby, press the
[Redial/Pause] to open the redial list.
Use
[ ] and [ ] or [Redial/Pause] to scroll through the redial list.
When you nd the number you want to dial, press [ /Flash] or [ ] on the handset or pick up the corded
handset from the base or press
[ ] on the base.
Notes: • If the number exceeds 32 digits, only the rst 32 digits are retained in redial memory.
• If the redial memory is empty, EMPTY appears in the display and you will hear a beep.
• You can also press
[ /Flash] or [ ] on the handset or pick up the corded handset from the base or press
[ ] on the base before you open the redial list. Find the phone number you want to dial, and then press
[Menu/Select].
Deleting a Redial Record
If you want to delete a phone number from the redial list, follow the steps below:
With the phone in standby, press
[Redial/Pause].
Use
[ ] and [ ] to scroll through the redial list.
When you nd the redial number you want to delete, press [Menu/Select] and select DELETE ENTRY.
When the phone asks you to conrm, select YES. The redial number is deleted.
1)
2)
3)
1)
2)
3)
4)
UC517BH(DECT2088) book OM 2.indb36 36 1/9/2008 11:07:55 AM