Filter
Top Products
15
Installing the Phone
16
Wall Mounting the Base
This phone can be mounted on any standard telephone wall plate.
Remove the stand
from the base.
Connect the AC adapter and the
telephone cords as shown on
pages 8 and 9. Remember to route
the AC adapter cord through the
channel on the bottom of the base.
Plug the telephone
cord into the wall
jack. Route the
telephone cord
through the
molded wiring
channel on the
bottom of the
stand as shown.
Snap the stand
into the notches
on the bottom of
the base.
Route the AC adapter cord
through the molded wiring
channel on the bottom of
the stand, and let the cord
hang below the stand.
(To AC outlet)
UC517BH(DECT2088) book OM 2.indb15 15 1/9/2008 11:07:37 AM