Filter
Top Products
4545
Setting Up the
Answering System
4646
Deleting Your Personal Greeting
You can delete your personal greeting from the base. You cannot delete the pre-recorded greeting.
On the base, press
[Menu/Select].
Select the ANSW. SETUP menu, and then the GREETING OPTIONS submenu.
The system plays the current greeting.
While the personal greeting is playing, press
[ ].
The system announces “Greeting has been deleted,” and switches back to the pre-recorded greeting.
Selecting the Language for Announcements
You can select the language of your answering system announcements. The default system language is English.
Press [Menu/Select].
Select ANSW. SETUP, and then the ANSW. LANGUAGE submenu.
Move the cursor to choose a language.
for US models: Choose ENGLISH or ESPAÑOL (Spanish).
for Canadian models: Choose ENGLISH or FRANÇAIS (French).
Press
[Menu/Select]. You will hear a conrmation tone.
Setting the Number of Rings
The ring time setting allows you to set the number of rings the caller hears before your answering system plays the
outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver (TS)
setting, the answering system picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can hang up after the third ring to
avoid long distance billing charges.
Press
[Menu/Select].
Select the ANSW. SETUP menu, and then the RING TIME submenu.
Move the cursor to select a ring time (TOLL SAVER, 2 TIMES, 4 TIMES, or 6 TIMES).
Press
[Menu/Select]. You will hear a conrmation tone.
1)
2)
3)
4)
1)
2)
3)
4)
1)
2)
3)
4)
UC517BH(DECT2088) book OM 2.indb45 45 1/9/2008 11:08:02 AM