Filter
Top Products
33
Using Your Phone
Making a Call from the Phonebook
With the phone in standby, press [ ] to open the phonebook.
Find the phonebook entry you want to call (see Finding a Phonebook Entry on
page 27).
Press
[ /Flash] or [ ] on the handset or pick up the corded handset from the base or press [ ] on the base
to dial the number.
Note: You can also press
[ /Flash] or [ ] on the handset or pick up the corded handset from the base or press
[ ] on the base before you open the phonebook. Find the phone number you want to dial, and then press
[Menu/Select].
Chain dialing from the phonebook
If you often have to enter a series of digits or a code number during a call, you can save that code number to a
phonebook entry. When your call connects, just use the phonebook to transmit the saved code number. (This is
referred to as chain dialing.)
Enter the code number (up to twenty digits) into the phonebook (see Creating Phonebook Entries on page 26).
Be sure to enter the code number into the phonebook exactly as you would enter it during a call.
During a call, when you hear the prompt that tells you to enter the code number, press
[ ].
Use
[ ] or [ ] to select the phonebook entry that contains the digits you want to send.
Press
[Menu/Select]. The phone sends the digits of the code number exactly as you saved them in the
phonebook entry.
Switching to the Speakerphone During a Call
Handset: To switch a normal call to the handset speakerphone, press [ ]. To switch from a handset speakerphone
call to a normal call, press
[ ].
Base: To switch a call from the corded handset to the base speakerphone, press [ ] and then return the corded
handset to the cradle. To switch a call from the base speakerphone to the corded handset, simply remove the corded
handset from the cradle.
1)
2)
3)
1)
2)
3)
4)
UC517BH(DECT2088) book OM 2.indb33 33 1/9/2008 11:07:52 AM