Filter
Top Products
35
TAD Operation
press
ON/OFF/STOP
while the message is
playing. The system stops playback and sets
itself to answer the next call.
Note:
If you press
ON/OFF/STOP
while the
playback is already stopped, the system
turns off the answering function.
Variable Speed Playback
Variable Speed Playback allows you to play
your messages 25% faster or 25% slower.
The pitch of the caller's voice remains un-
changed.
1. Press
VSP SLOW
9
99
9
to slow down, or
VSP FAST
8
88
8
to speed up. The message
plays slower or faster than normal.
2. To resume normal playback, press the
opposite button: press
VSP SLOW
9
99
9
to
return from fast playback, press
VSP
FAST
8
88
8
to return from slow playback.
DELETING MESSAGES
To delete the current message while retain-
ing others, press
ERASE
during playback.
You hear a beep to indicate the message is
erased. After the “End of messages” an-
nouncement, the message counter is updat-
ed.
To delete all messages at once, press
ERASE
within 7 seconds after all messages
have played. The TAD announces “I will
erase messages,” and deletes all messages.
The message counter returns to
00
.
If you change your mind and decide not to
delete all messages, press
SAVE
within 3
seconds after you press
ERASE
. The TAD
announces “I will save messages.”
REMOTE OPERATION
Programming a Remote Access
Code
The TAD's three-digit remote access code
prevents unauthorized remote access to
your messages. The access code is preset
to
1
2
3
. Follow these steps to change the
code to any number from
0
0
0
to
9
9
9
.
1. Press
PROGRAM
.
2. Select
ANSW
.
3. Select
NEXT
four times until
REMOTE
CODE
appears.
4. Enter three digits, using the keypad.
Select
CHANGE
.
5. Select
SAVE
.
6. Press
PROGRAM
to exit.
To check your remote access code, follow
Steps 1–3 above. The current access num-
ber appears. Press
PROGRAM
to exit.
Using Remote Access
While you are away from your home or of-
fice, you can use a touch-tone phone, or
pulse (rotary) phone with a pocket tone dialer
(available through your local RadioShack
store) to access your messages.
The TAD hangs up after you enter your re-
mote access code if no new messages were
received.
Press To
1 Play All Messages
2 Save All Messages
3 Erase All Messages
*
Skip Backward
#
Skip Forward
43-5708.fm Page 35 Monday, September 18, 2000 7:56 AM