Filter
Top Products
31
TAD Operation
2. Select
ANSW
.
3. Select
NEXT
twice until
GREETING
SETUP
appears.
4. Select
ENTER
.
RECORD
GRT
appears.
5. Select
NEXT
three times until
CHECK
GREETING
appears.
6. Select
ENTER
.
PLAY
GREETING
1
appears.
7. Repeatedly select
NEXT
until the greet-
ing number you want to check appears.
8. Select
START
.
9. Press
PROGRAM
to exit.
SETTING THE GREETING
MODE
The system has two greeting modes. Answer
asks the caller to leave a message. An-
nounce Only is simply an announcement and
does not let the caller leave a message. The
system is preset to Answer.
Note:
Announce Only lets you set the sys-
tem to route the call to a specified station
and leave a message on that station.
1. Press
PROGRAM
.
2. Select
ANSW
, then select
NEXT
twice
until
GREETING
SETUP
appears.
3. Select
ENTER
, then select
NEXT
twice
so
GRT
MODESELECT
appears.
4. Select
ENTER
.
MODE
ANSWER
appears.
5. Select
CHANGE
to toggle between
ANSWER
and
ANNC
ONLY
.
Note:
If a greeting has not been
recorded,
PLEASE
RECORD
GREET-
ING
1
appears.
6. Select
DONE
.
7. Press
PROGRAM
to exit.
SELECTING THE PRIMARY
GREETING
After recording all the greetings, select the
primary greeting. The factory preset greeting
is Greeting 1.
Note:
When the greeting timer is pro-
grammed (see “Setting the TAD to Answer
Calls” on Page 32), you cannot select a pri-
mary greeting. The greeting that plays during
the programmed time is always Greeting 1.
Greeting 2 plays the rest of the time.
1. Press
PROGRAM
.
2. Select
ANSW
.
3. Select
NEXT
twice until
GREETING
SETUP
appears.
4. Select
ENTER
.
5. Select
NEXT
.
SELECT
GRT
appears.
Select
ENTER
.
If the greeting timer is turned on,
CAN-
NOT
SELECT
GREETING
–
GREET-
ING
TIMER
IS
ON
scrolls across the
display.
GRT
n
NO
RECORD
appears if the
selected greeting has not been
recorded.
6. Select
CHANGE
to choose the main
greeting you want to answer calls.
GRT
n
RECORDED
appears. Select
DONE
.
7. Press
PROGRAM
to exit.
43-5708.fm Page 31 Monday, September 18, 2000 7:56 AM