Filter
Top Products
About your SL-5500 23
Opening or closing the keyboard
Connecting the SL-5500 to your PC
To synchronize data with a PC, connect the SL-5500 to your PC using the Docking
Station. Refer to the PC operation manual for more information regarding
connection.
1.
Connect the USB connector of the Docking Station to the USB port of the PC.
Note:
• The USB cable of the Docking Station is used to connect the SL-5500 to a PC
(PC link, etc.). It is not used for charging.
• For details on synchronization with a PC, etc., see the on-line operation
manuals (on the CD-ROM) for the PC link software.
To open the keyboard, hold the slide cover firmly and pull it down until it is locked.
To close the keyboard, push it upwards until it is locked.
Note:
• Please close the slide cover when you carry your SL-5500. Carrying the SL-
5500 with the slide cover open may cause damage.
• Be sure to press the keys on the slide cover by opening or closing the cover
until it locks into position.
These keys may not work unless the cover stays open or if the cover is
closed halfway.
PC
USB port
USB connector
Docking Station
00 Cover.book Page 23 Saturday, January 19, 2002 11:33 AM