Filter
Top Products
74
OHVA
When the user makes or transfers a call to a busy station, the user can set the ‘OHVA’ function.
Setting the ‘OHVA’ Function by using the Call Control Button
When making or transferring a call to a busy station, click the [OHVA] button (
) to set the
‘OHVA’ function.
Setting the ‘OHVA’ Function by using the Popup Menu
When making or transferring a call to a busy station, right-click a device from the <Active>
window and then select the [OHVA] menu to set the ‘OHVA’ function.
When DND is set to the station
If DND is set on the target station, the ‘OHVA’ function cannot be set.
Connect to Voice Mailbox
The user can check messages saved in the voice mailbox by selecting [My Voice Mail] from
the [Call] menu.
This menu enables digital/IP phone users to automatically make a call through a speaker. For
regular phones, lift the handset first before attempting the connection to the voice mailbox.
Checkpoint
The SVM card should be mounted on the system and operated properly to
use My Voice Mail.
Leave Voice Message
The user can leave a message to another subscriber’s voice mailbox by selecting [Leave
Voice Message] from the [Call] menu.
After entering the extension number in [Destination] of the <OfficeServ Operator> Call Button
Window, select [Leave Voice Message] from the [Call] menu.
NOTE
NOTE
Table of Contents
Home Page