Filter
Top Products
Samsung System Administration Guide
DCS-408 & 408i November 2001
25
Program Station Key Extenders
[MMC 107]
You can view stations’ programmable key assignments and add extenders to some of
these keys for easy one-touch operation of frequently-used features.
An extender is a number that makes the otherwise general function of a programmable
key more specific. For example, adding the digit ‘2’ to a PAGE key (“PAGE2”) defines
this key for paging zone 2 only; and adding ‘25’ to a directed pickup key (“DP25”) de-
fines this key as pickup for extension 25 only. An extender can be assigned at the time
the key function is assigned (using MMC 722 or 723) or can be added later, as de-
scribed here. You can assign extenders to the following programmed keys:
Key Function Extender
BOSS
Boss and Secretary
1
–
2
DIR
Directory dial by name type 1 (PERS), 2 (SYS) or 3 (STN)
1
DP
Directed Pickup Station or station group no
DS
Direct Station Select Station or station group no.
FWRD
Call Forward
0
–
5
GPIK
Group Pickup
01
–
04
IG
In/Out of Group 50–53
MMPG
Meet Me Page
0–2, 5, ∗
PAGE
Page
0–2, 5, ∗
PSMG
Programmed Station Message
01
–
20
SG
Station Group 50–53
SP
UCD Supervise UCD group no.
SPD
Speed Dial 00–49 (personal), 500–699 (system)
VT
Voice mail transfer Group number
1
PERS = personal speed dial names SYS = system speed dial names STN = internal ex-
tensions (stations)
Program Keys
VOLUME UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear previous entry.