Filter
Top Products
Samsung System Administration Guide
DCS-408 & 408i November 2001
11
Set System Date and Time
[MMC 505]
Should it ever become necessary to correct the system date and time displayed on
keysets, do so as soon as you notice that they are incorrect. Automatic Night Service
will not work correctly and Station Message Detail Recording (SMDR) reports will be of
no value if the date and time are not correct.
The display format is as follows:
W (Day of the week, 0-6): e.g., enter 0 for Sunday, 1 for Monday, …, 6 for Saturday.
MM (Month, 01-12): e.g., enter 01 for January and 12 for December.
DD (Day of the month): enter a number in the range 01–31.
YY (Year): enter the last two digits of the year (e.g.
01
for 2001).
HH (Hours): use the 24-hour clock and enter a number in the range 00–24.
MM (Minutes): enter a number in the range 00–59.
Failure to enter the time using the 24-hour clock will cause the date to change at 12:00
pm.
Program Keys
KEYPAD - Used to enter selections.
SPEAKER - Used to store data and advance to next program.
ACTION DISPLAY
1. Open customer programming and select
505
Display shows currently set (“old”) time and date
2. Enter the new time and date using the above format
(e.g. 3110701, 2.45pm)
3. Verify the time and date and reenter them if necessary
4. Press TRSF to store and exit programming
OR
Press SPEAKER to store and advance to next MMC
If you have entered invalid data, you will receive an [INVALID ENTRY] message for three sec-
onds. Reenter the correct date and time. If the information you entered is incorrect, repeat the
procedure.
OLD : 6010184 : 0047
NEW : WMMDDYY : HHMM
OLD : 3110701 : 1445
NEW : WMMDDYY : HHMM
OLD : 6010184 : 0047
NEW : 3110701 : 1445