Filter
Top Products
Samsung System Administration Guide
DCS-408 & 408i November 2001
20
❍
❍❍
❍
Program Personal Speed Dial Numbers for Stations
[MMC 105]
Station speed dial codes are 00–49, allowing a maximum of 50 numbers per keyset to
be assigned (see Assign Speed Dialling Blocks, below). Each station has one block
assigned by default, allowing up to 10 numbers to be entered.
Each speed dial number consists of a line access code and the telephone number to
be dialled. The access code can be any line group (e.g. 9), individual line, station
group or individual extension. The speed dial number can be up to 24 digits long in-
cluding the characters #, FLASH and PAUSE.
Note: If Least Cost Routing (LCR) is being used, the LCR access code must be entered.
Refer to Program System Speed Dial Numbers for information on the special keys ‘A’
to ‘F’ you can use while programming personal speed dial numbers.
Program Keys
VOLUME UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
‘A’ to ‘F’ - See
Program System Speed Dial Numbers.
ACTION DISPLAY
1. Open customer programming and select
105
2. Dial the station number (e.g., 25)
OR
Press UP or DOWN to select the station and press the
right soft key to move the cursor
If the selected station has no speed dial blocks, this display
will be shown and a new station may be selected
3. Enter the speed dial number (e.g., 05)
OR
Press UP or DOWN to select and press the right soft key
to move the cursor
4. Enter the trunk access code (e.g., 9 - the system automatically
inserts a dash) followed by the number to be dialled up to 24
digits (e.g. 08104264100)
If you enter a wrong number, either press
HOLD
to clear the
entire entry or use the
DOWN
key to move the cursor back
5. Press the F key to enter a name for this speed dial (see Program
Personal Speed Dial Names)
OR
Press the left soft key to return to step 3 to select another speed dial
[2
1] SPEED DIAL
00 :
[25] SPEED DIAL
00 :
[25] SPEED DIAL
NO SPEED BLOCK
[25] SPEED DIAL
05 : _
[25] SPEED DIAL
05 : 9-08104264100