Filter
Top Products
Samsung System Administration Guide
DCS-408 & 408i November 2001
16
Program Station Group Names
[MMC 602]
You can assign a name or identification to each station group (50-53), up to 11 charac-
ters long. The procedure for entering names is the same as described in Program Sta-
tion Names, above.
Program Keys
VOLUME UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
‘A’ - Used to toggle upper and lower case.
ACTION DISPLAY
1. Open customer programming and select
602
2. Dial the group number (e.g., 53)
OR
Press UP or DOWN to make a selection and press
the left or right soft key to move the cursor
3. Enter the group name (e.g. SAMSUNG)
If you make a mistake, either press HOLD to clear the
entire entry or use the
DOWN
key to move the cursor back
4. Press the left or right soft key to return to
step 2
OR
Press TRSF to store and exit programming
OR
Press SPEAKER to store and advance to next MMC
[5
0] SGR NAME
[53] SGR NAME
_
[53] SGR NAME
SAMSUNG