Filter
Top Products
78
Reset to Factory Defaults
See page 41 for a description on how to reset the FLX2 Conference Phone back to its
factory defaults.
Technical Specifications
Models
The Revolabs FLX2 VoIP System is available with a variety of configurations to provide
the best audio capture in the industry. The following is a list of the available models. All
of these models are SIP enabled and require an IP connection.
10-FLX2-200-VOIP FLX2 System w/ 2 Omni Microphones
10-FLX2-101-VOIP FLX2 System w/ 1 Omni & 1 Wearable Microphone
10-FLX2-002-VOIP FLX2 System w/ 2 Wearable Microphones
10-FLX2-020-VOIP FLX2 System w/ 2 Directional Microphones
FLX
Wireless Technology
DECT
DECT 6.0 for US, ETSI ETS 300 175 for other countries
Bluetooth
BT 2.1 + EDR
Wireless Range
DECT
65 feet, 20 meters
Bluetooth
Class II, 33 feet, 10 meters
Security (DECT / Bluetooth)
DECT: 128 bit encryption
Noise Cancelation
Noise cancellation on the Microphone
Echo Cancelation
Acoustic echo canceller for Speaker/Microphone.
RF Shield
No cell phone interference due to RF Armor
TM
technology
Language versions
System messages and menus in English; Documentation
in English
Certifications / Regulatory
Compliance
Electrical Safety
UL/CSA, EN 60950
Radio / Telephone
Part 68, IC-CS03, TBR 21, A-Tick
Environmental Requirements
0°C - 40°C; 20% - 80% non-condensing humidity
Warranty
1 year
Speaker
Dimensions Speaker
157mm x 93mm diameter
Weight
600.3g
Bandwidth
120-11,000 Hz from Analog IN. This is reduced for VoIP
calls based on the bandwidth supported by the selected
transport codec.
Battery life (talk time)
8 hours.
Charge time
3 hours