Filter
Top Products
75
the Base Station. All components should automatically connect to the Base
Station after a few seconds.
2. The Base Station is powered up, but the Status LED indicates a fault has
happened by missing every fifth green double flash. Power down and power up
the Base Station. All components should reconnect to the Base Station after a
few seconds. The fault message in the Base Station will continue (every fifth
double flash is skipped) – this just shows that a fault has happened in the past
and can be ignored. If the components still do not connect to the base please
contact Revolabs Support.
3. Are the Dialer, Microphone, and Speaker out of reach of the Base Station?
Please bring the components closer to the Base Station to see whether this
resolves the issue.
4. Power down the Base Station, the Microphones, the Dialer, and the Speaker.
Now power up the Base Station. Once the Base Station is powered up (double
green flashes of the Status LED), power up the Dialer, and then the Microphones
and the Speaker. The components should now connect to the Base Station.
5. If the components still do not connect to the Base Station, please re-pair the
components that have not connected to the Base Station, beginning with the
Dialer. Pair of components to the Base Station is explained on page 42.
6. If the components still do not connect to the Base Station, please contact
Revolabs support.
Microphone, Speaker, or Dialer not paired with Base Station
Please follow the descriptions on page 42 on how to pair the different components with
the Base Station.
LED Indicators
Device LED Indicator
Status
Microphone in Charger Base
Steady Red Charging
Steady Green Fully charged
Single red flash
Active phone call, both microphones in Charger
Base, microphones muted via Master Mute or All
Mic Mute is ON
Double red flash
Active phone call, microphone(s) in Charger Base,
microphone is muted
Green flash
Active phone call, microphone in Charger Base is
unmuted
Off
Microphone is powered off:
o Microphone is not seated properly
o Charger Base is powered off
Microphone not in Charger Base
Off Microphone is powered off
Single green flash every second On, connected, battery charged, un-muted