Filter
Top Products
66
Aux In Level,
Aux Out Level
The “Aux In” and “Aux Out” settings are used to change the level of
the Aux In and Out signals. The range is 1-15.
Aux Out Mic/Line
Use Aux Out Mic/Line to set the level of the Aux Out connectors to
either Mic level or Line level.
Omni AEC,
Directional AEC,
Lapel AEC
The AEC options allow controlling the Acoustic Echo Cancellation
levels of the different microphone types (Omni, Directional, or
Lapel). The range is 0-8, with 8 the most aggressive echo
cancellation.
RF Setting
Use the RF Setting page to set the Radio Frequency (RF) signal strength of the base
station and microphones. There are three RF Power settings: High, Medium, and Low.
The default is High. Low or Medium can be selected to reduce the signal strength.
Lower signal strength reduces the maximum distance between the base station and any
of the wireless devices. A lower setting might be desirable in environments where more
wireless DECT traffic is encountered.
The illustration below shows the RF Setting page. It is not necessary to restart the
phone after changing the RF Power setting, but it is necessary to press “Save” for the
change to be taken into the phone.
Access Control
Use the Access Control page to set the system password, enable or disable the Recent
Call list on the FLX Handset, and enable or disable web access. The illustration below
shows the Access Control page. You do not need to restart the phone for changes to
take effect, but will need to press “Save” for the change to be taken into the phone.