Revolabs 10-FLX2-200-VOIP 10-FLX2-020-VOIP 10-FLX2-002-VOIP 10-FLX2-101-VOIP Wireless Office Headset User Manual


 
77
Device LED Indicator
Status
Alternating slow Red - Green flash
Speaker is not paired to a Base Station
Off
Speaker is powered off:
o Speaker is not seated properly
o Charger tray is powered off
Speaker not in Charger Base
Off
Speaker is powered off
Green flash every second
o Connected, no call in progress, Microphones in
Charger Base
o Connected, no phone call in progress,
Microphone(s) outside of the Charger Base
unmuted
o Connected, call in progress, Microphones are not
muted using All Mic Mute or Master Mute
o Microphone(s) might still be individually muted
Red flash every second
o Connected, phone call in progress, Master Mute
or “All Mic Mute” is ON, all microphones are
muted
o Connected, no phone call in progress,
Microphone(s) outside of Charger Base, “All Mic
Mute” is ON, all Microphones are muted
Alternating Green Yellow* flash
o Connected, battery low, no call in progress
o Connected, battery low, call in progress,
Microphones are not muted using All Mic Mute or
Master Mute. Microphone(s) might still be
individually muted
Alternating long Red Yellow* flash
o Connected, battery low, no call in progress, “All
Mic Mute” is ON, all Microphones are muted
o Connected, battery low, call in progress, Master
Mute or “All Mic Mute” is ON, all Microphones
muted
Flashing Yellow* – Red – Yellow* –
Green
Searching for a connection to the base
The speaker will try to re-establish the link
for about 10 minutes, then power off.
Alternating slow Red - Green flash
Speaker is not paired to a Base Station
The speaker will power down after two minutes.
Steady Red
o Speaker is being powered down
o Speaker is in pairing mode.
Groups of five rapid Red flashes
Speaker is in a fault condition.
Device LED Indicator
Status
Base Station
Long solid on, then a long solid off
Power On Boot Process
Double flashes every second
Operating Mode indicating that Base Station is
functional.
Skip every fifth double flash
Fault indication. This also indicates past faults that
have no bearings on current operation
Continuous Fast Flashing
Updating non-volatile memory as part of software
update
Off
No Power
* In some Speakers the LED Indicator color Yellow might look like Red.