Filter
Top Products
55
• RF Settings
• Access Control
• Import/Export
• System Log
• Call Status
• Restart
• Logout
Choose an Administrator Menu option to show the corresponding page.
Network Settings
Use the Network Settings page to specify how IP addressing is to be determined for the
phone connected to the IP network. You can use DHCP to automatically detect the
phone’s IP address and network server settings, or you can manually specify a static IP
address for the phone and the network server addresses provided by your network
administrator. If you select Static IP as the Connection Type, you will have to provide
the Static IP Address, Subnet Mask, and Default Gateway. If DHCP is set, it will take
precedent over manually entered Static IP information.
The illustration shows the Network Settings page. Note that after changing any settings,
the changes must be saved and the phone must be restarted for the changes to take
effect.
Network Settings
Connection Type
Select the network connection type, either DHCP or Static IP. If you
choose Static IP, specify the Static IP Address, Subnet Mask, and
Default Gateway in the fields below.