Filter
Top Products
23
Answering System Operation
Remote Commands
Press
#
then
To
1 Repeat current message during
playback. If you press #,1 within
about 4 seconds after a message
begins, the previous message
replays (unless it is the first new
message).
2 Play messages. The remote
playback of incoming messages is
limited to 4 minutes. If you have more
messages after 4 minutes have
passed, you must press # 2 again to
listen to the rest of the messages.
3 Skip current message during
playback.
4 Delete current message during
playback. You can only delete the
current message during playback.
You cannot delete all the messages
stored at one time.
5 Stop playback or recording.
6 Set the system to answer calls.
Announces the current outgoing
message.
7 Record a memo. Announces “Record
your message after the tone.” The
length of a memo recorded by remote
operation must be over 2 seconds
and within 4 minutes. Press #,7 again
or #,5 to stop recording.
8 Record a new outgoing message.
Announces “Record your greeting
after the tone.” Press #,8 again or #.5
to stop recording.
9 Set the system to not answer calls.
0 Announces the help guidance.