Filter
Top Products
16
Caller ID Operation
Caller ID Messages
ADDING/DELETING THE
AREA CODE
When the area code of the received call is
the same as the one you stored (see “Storing
Your Area Code” on Page 10), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press
3
to add or delete the area
code. Pressing
3
again deletes or adds the
area code.
When you dial the number or store it into
memory, the phone dials or stores the
number as it appears on the display.
DIALING NUMBERS FROM A
CALLER ID RECORD
To dial a local number stored in a Caller ID
record, recall the record, then press
TALK
. If
it is a long distance call, press
1
(
'
''
'
appears
before the displayed number) before you
press
TALK
. If you want to add or delete the
area code, press
3
before you press
TALK
.
Note:
If a Caller ID record does not contain a
phone number (if it was blocked by the caller,
for example), you cannot dial from that
record.
STORING A CALLER ID
RECORD IN MEMORY
1. Press
CALL ID
, then
8
or
9
to recall the
record you want to store.
If it is a long distance number, press
1
.
If you want to add or delete the area
code, press
3
.
2. Press
MEM
.
I[b[YjýBeYWj_ed
I[b[YjýBeYWj_edI[b[YjýBeYWj_ed
I[b[YjýBeYWj_ed
appears.
3. Choose a memory location (
0
–
9
) by
pressing a number or by repeatedly
pressing
8
or
9
, then press
SELECT
.
If the selected location is empty, the
phone beeps to confirm that it stored the
number, then the Caller ID record
appears.
If a record exists in the selected
location,
H[fbWY[ýC[ceho5
H[fbWY[ýC[ceho5H[fbWY[ýC[ceho5
H[fbWY[ýC[ceho5
appears,
prompting you to confirm the
replacement. Move the cursor to
O[i
O[iO[i
O[i
or
De
DeDe
De
, then press
SELECT
.
DELETING CALLER ID
RECORDS
You can delete Caller ID records individually
or all at once.
Display Description
D[m0ýNN
D[m0ýNND[m0ýNN
D[m0ýNN
JejWb0ýNN
JejWb0ýNNJejWb0ýNN
JejWb0ýNN
Shows the number of new
Caller ID records (records
you have not reviewed)
and the total number of
records.
Fh_lWj[ýDWc[ý
Fh_lWj[ýDWc[ýFh_lWj[ýDWc[ý
Fh_lWj[ýDWc[ý
or
Fh_lWj[ýDkcX[h
Fh_lWj[ýDkcX[hFh_lWj[ýDkcX[h
Fh_lWj[ýDkcX[h
The caller has blocked the
Caller ID information.
KdademdýDWc[
KdademdýDWc[KdademdýDWc[
KdademdýDWc[
or
Kdademdý
KdademdýKdademdý
Kdademdý
DkcX[h
DkcX[hDkcX[h
DkcX[h
The caller is not within a
Caller ID service area.
?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW
Appears if there was an
error during the
transmission of Caller ID
information. Occasional
errors are normal. If the
phone frequently displays
ý
ýý
ý
?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW?dYecfb[j[ý:WjW
?dYecfb[j[ý:WjW
, contact
your local telephone
company or RadioShack
store.