Filter
Top Products
14
Telephone Operation
8. Press
SELECT
. The phone beeps and
C[cehoýdýI
C[cehoýdýIC[cehoýdýI
C[cehoýdýIjeh[Z
jeh[Zjeh[Z
jeh[Z
(
d
dd
d
is the memory
location number) appears.
C[cehoýIjeh[
C[cehoýIjeh[C[cehoýIjeh[
C[cehoýIjeh[
appears. Repeat Steps 3–
8 to store more numbers.
9. When you finish, press
MEM
.
To replace a stored number, store a new one
in its
place.
Editing or Deleting a Number in
Memory
1. Lift the handset.
2. Hold down
MEM
until
C[cehoý Ijeh[
C[cehoý Ijeh[C[cehoý Ijeh[
C[cehoý Ijeh[
and a
list of memory location numbers appear.
3. Choose a memory location (
0
–
9
) by
pressing a number or by repeatedly
pressing
8
or
9
.
4. Press
SELECT
. Press
8
or
9
to
highlight one of the three options then
press
SELECT
to choose it.
;Z_jýC[ceho
;Z_jýC[ceho;Z_jýC[ceho
;Z_jýC[cehoý
ýý
ýd
dd
d
— edit the record as
described in Steps 5 through 8 of
“Storing a Name and Number in
Memory” on Page 13.
:[b[j[ýC[ceho
:[b[j[ýC[ceho:[b[j[ýC[ceho
:[b[j[ýC[cehoý
ýý
ýd
dd
d
— the display prompts
you to confirm the deletion. Press
8
to
move the cursor to
O[i
O[iO[i
O[i
, then press
SELECT
or
DELETE
. The phone beeps,
and
C[ceho
C[cehoC[ceho
C[cehoý
ýý
ýdý:[b[j[Z
dý:[b[j[Zdý:[b[j[Z
dý:[b[j[Z
appears.
=eý8WYa
=eý8WYa=eý8WYa
=eý8WYa
— returns you to the list of
memory numbers.
Entering a Pause
In some telephone systems, you must dial an
access code (9, for example) and wait for a
second dial tone before you can dial an
outside number. You can store the access
code with the phone number. However, you
should also store a pause after the access
code to allow the outside line time to
connect. To enter a 2-second pause, press
REDIAL/PAUSE
.
F
FF
F
appears. You can add
more pause entries for a longer pause.
Reviewing Memory Numbers
To review your memory numbers, press
MEM
. The list of memory location numbers
(
'
''
'
–
&
&&
&
) appears with the name stored with each
number (or
2C[ceho
2C[ceho2C[ceho
2C[cehoý
ýý
ýd4
d4d4
d4
if you did not store a
name).
To see the stored phone numbers, press #/
7
77
7
. An arrow to the right of the number
means it is longer than 14 digits. Press #/
7
77
7
again to see the rest of the number.
Repeatedly press
TONE/
6
/*to return to the
name display.
To exit the memory number list, press
MEM
.
To see a stored name and phone number at
the same time, press
SELECT
when the
cursor is by a memory location number. To
exit this display, hold down
DELETE
until the
display clears.
Dialing a Memory Number
To dial a number stored in memory, lift the
handset and press
MEM
. The list of memory
location numbers appears.
Choose a memory location (
0
–
9
) by pressing
a number or by repeatedly pressing
8
88
8
or
9
,
then press
TALK
.
You can also dial a memory number after
pressing
TALK
. Press
MEM
(the display does
not change but the phone’s memory recall
activates) then enter a memory location
number.
Chain-Dialing Service Numbers
For quick recall of numbers for special
services (such as bank by phone), store