Filter
Top Products
The Integrated Answering Device
66
4. Enter a command within 15 seconds,
each command thereafter must be
entered within two seconds. You may
select a command from the following
chart:
5. After the command has finished, you
hear intermittent beeps indicating that
the system is in the command waiting
mode. You may enter another
command at this time from the chart
above.
6. When you are finished, hang up to exit
the system. The answering system
automatically returns to standby.
Command Function
0 then 1 Repeat a Message
Ô
0 then 2 Playing incoming Messages
0 then 3 Skipping a Message
0 then 4 Deleting a Message
0 then 5 Stop Operation
Ô
0 then 6 Answering System On
0 then 7 Memo Record/Stop
Ô
0 then 8 Greeting Message Record/Stop
Ô
0 then 9 Answer System Off
1 then 0 Help Guidance
Ô NOTES Ô
• For Repeat a Message
function, press 0 then 1
within about four
seconds to repeat the
previous message, or
press 0 then 1 after
about four seconds to
repeat the current
message.
• For the Memo Record
and Greeting Message
Record functions, the
first time you enter the
corresponding
command, it starts the
Recording function. If
you want to stop the
recording, press 0 then 7
or 8, or 0 then 5.