Filter
Top Products
Using Your Phone
37
THREE-WAY CONFERENCING
The phone permits Three-way
conversations between the handset, base,
and an outside line. Ô
When speaking on the handset
1. Press SPEAKER on the base to initiate
the three-way conversation.
2. To hang up, press
SPEAKER on the
base. The handset will still be
connected to the call.
When speaking on the base
1. Press TALK/FLASH or SPEAKER on the
handset to initiate the three-way
conversation.
2. To hang up, return the handset to the
cradle, or press
END key on the
handset. The base will still be
connected to the call.
FLASH AND CALL WAITING
If you have Call Waiting service and a call
waiting tone sounds while you are on a call,
press
TALK/FLASH to accept the waiting
call. There is a short pause, and then you
will hear the new caller. To return to the
original caller, press
TALK/FLASH again. Ô
FIND HANDSET
To locate the handset, press FLASH/PAGE
on the base when the phone is in standby
mode. All registered handsets beep for 60
seconds, and
Paging
appears on the
handset display. To cancel paging, press
any key on the handset or
FLASH/PAGE on
the base. Ô
Ô NOTES Ô
Three-way Conferencing
If you have more than one
handset, the phone permits
Four-way conversations,
see “Four-Way
Conferencing” on page 53
for details.
Flash and Call Waiting
You must subscribe through
your local telephone
company to receive Call
Waiting or Caller ID on call
waiting service.
Find Handset
If the battery pack is
completely drained, the
handset will not beep.