Filter
Top Products
Expanding Your Phone
55
2. Select a handset or the base to transfer
the call within ten seconds. (Refer to step
2 in the intercom section on page 53.)
The call will automatically be placed on
hold, and an intercom tone sounds.
To cancel the transfer, press the
CANCEL
soft key, TALK/FLASH or SPEAKER on
the initiating handset.
3. On the receiving handset, to answer the
page, press
TALK/FLASH, the ANSWER
soft key, or
INTCM/HOLD. The intercom
mode is activated, but the caller is still
on hold. Or press any number key,
/TONE/< or #/> (when Anykey Answer
is on), or pick up the handset from the
cradle (When Auto Talk is on).
On the receiving base, to answer the
page, press
SPEAKER, the ANSWER
soft key or INTERCOM/HOLD.
4. To hang up the intercom call, press
END or the END soft key on the handset
(or INTERCOM/HOLD or the END soft
key on the base).
5. To speak to the caller, press
TALK/FLASH on the receiving handset
(or
SPEAKER on the receiving base).
From the base to a handset
1. During a call, press INTERCOM/HOLD on
the base.
2. Select a handset to transfer the call
within ten seconds. (Refer to step 2 in
the intercom section on page 54.) The
call will automatically be placed on
hold, and an intercom tone sounds.
To cancel the transfer, press
INTERCOM/HOLD, SPEAKER or the
CANCEL soft key on the base.