Filter
Top Products
Expanding Your Phone
52
When
Registration Complete
is
displayed, the handset has been
registered to the base. If
Registration Failed
appears,
please try these steps again.
USING THE DIRECTLINK
MODE
To use this feature, you must enter the two
handsets into the DirectLink mode first. Ô
To enter the DirectLink mode, see “Using
DirectLink Mode” on page 17.
DirectLink call
1. When the phone is in the DirectLink
standby mode, press the
DirectLink soft
key.
2. Select the handset to which you wish to
DirectLink by pressing the number keys
(
1-9, 0). Your handset will then page the
other handset.
3. On the receiving handset, press
TALK/FLASH, the ANSWER soft key or if
Anykey Answer is on, press any
number key, /TONE/< or #/>.
4. When you finish your conversation,
press
END or the END soft key on either
handset.
5. To cancel DirectLink mode, return the
handset to the cradle, or press the
CANCEL soft key and then the OK soft
key.
Ô NOTE Ô
Handsets can be in Direct
Link mode while other
handsets are in use. To use
the 43-3581, register it to
the original base.