Filter
Top Products
Appendix D: Bar Codes Settings
UPC A
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual D-11
D.2.9 UPC A
Enabled
Set this parameter to on to enable “UPC A”.
UPC-A Check Digit
If you enable this parameter, the check digit is included with the decoded bar code data.
UPC-A Preamble
When you double-tap on this parameter, a dialog box is displayed where you can choose one
of three options for lead-in characters for UPC-A symbols transmitted to the host device:
System Char – system character transmitted with the data, Country code and System Char –
both the country code (“0” for USA) and system character are transmitted with the or None
– no preamble is transmitted. The lead-in characters are considered part of the symbol.
Add/Remove Data
Refer to “Add/Remove Data” on page D-9 for details.
D.2.10 UPC E
Enabled UPC-E
Set this parameter to on to allow “UPC E” bar code scans.
Enabled UPC-E1
Set this parameter to on to allow “UPC-E1” (zero suppressed) bar code scans.
UPC-E And UPC-E1 Check Digit
If you enable one or both of these parameters, a check digit is included with the decoded bar
code data.
UPC-E And UPC-E1 Preamble
When you double-tap on one of these parameters, a dialog box is displayed where you can
choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmit-
ted to the host device: System Char – system character transmitted with the data, Country
code and System Char – both the country code (“0” for USA) and system character are
transmitted with the data or None – no preamble is transmitted. The lead-in characters are
considered part of the symbol.