Filter
Top Products
Chapter 6: Settings
Tools Menu
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual 227
The SIM card is missing. After the SIM has been inserted a reset may be required.
• SIM failure
The SIM card is permanently disabled (e.g. because the wrong PUK has been entered too
many times). A new SIM is needed.
• Modem failure
The modem did not respond to commands as expected. If a reset does not clear this condi-
tion, the modem may need to be replaced.
• NDIS error
An internal software error has occurred. If a reset does not clear this condition, Psion Tek-
logix technical support may need to investigate further.
6.44.5 Tools Menu
The Tools menu in the main Wireless WAN dialog box offers some additional, advanced
setup features.
6.44.5.1 Data Connection Configuration
Enable Automatic Connect
If the Enable automatic connect checkbox is checked (unchecked by default), the Wireless
WAN user interface will attempt to establish a packet data connection whenever packet data
is available (e.g. after resume from suspend without further user interaction).
To activate the automatic connection mode:
• Tap on the OK button.