Filter
Top Products
System Installation
PN: 1725-36122-001_M.doc
43
Run conduit to shelf
The shelves have two possible points of entry for conduit: on the side,
used for wall mounted shelves, or in the rear, used for rack mounted
shelves.
Select the point of entry (side or rear) for this installation and unplug
the correct opening on each shelf to be installed.
For each shelf:
1. Attach the conduit entry hardware (condulet) to the conduit.
2. Pull the conduit through the hole.
Connect wire to terminals
Connect the wire to the terminal strip and grounding stud, as shown
in the following illustration. Position the wires to be flat against the
back of the shelf.
+48V -48V
Customer
Installed
Wiring
Yellow
White
Green
or
Green/Yellow
Ground