Filter
Top Products
Answering system
For assistance, please visit http://www.panasonic.com/phonehelp 63
3 Enter the remote commands (see
“Remote commands” on page 63).
4 When finished, hang up.
Remote commands
You can press dial keys to access
certain answering system functions.
*1 If pressed within the first 3 seconds of
a message, the previous message is
played.
*2 During playback of the greeting, you
can record a new greeting by pressing
{4}.
N
o
t
e:
LIf the phone is being accessed
remotely, it will not respond to any
keys.
LRemote operation will end by pausing
for over 20 seconds during remote
operation.
Toll saver
If the Toll saver feature is turned on, the
unit answers within about 10 seconds
when new messages have been
recorded, and after over 10 seconds
when there are no new messages
present. For example, if you call this
phone from an outside line and the
phone rings for over 10 seconds, there
are no new messages present. You can
then hang up without being charged for
the call.
I
mpor
t
an
t
:
LMake sure that the answering system
is turned on (see “Turning the
answering system on/off ” on page 57)
and the Automated Attendant System
is turned off (see “Turning Automated
Attendant System on/off ” on page 53).
Turning Toll Saver on/off
I
mpor
t
an
t
:
LMake sure that the unit is in standby
mode.
1 Press {MENU/SET}.
2 Select “AA/TAD Setup”, then press
{MENU/SET}.
3 Select “Toll Saver”, then press
{MENU/SET}.
Key Remote command
{1} Repeat message (during
playback)
*1
{2} Play new messages
{2}{#} Play all messages
{3} Skip message (during
playback)
{4} Record a memo
{5}
Stop recording/playback
{6} Play answering system
greeting
*2
{7} Play Automated Attendant
System day time
greeting
*2
{8} Play Automated Attendant
System night time
greeting
*2
{9} Play Automated Attendant
System Auxiliary
greeting
*2
{0} Turn answering system
on/off
{*}{*} Erase currently playing
message
{*}{#} Erase all messages
➔
Toll Saver
Remote Code
Message Length
[V/^]:Scroll