Panasonic KX-TS4300 Telephone User Manual


 
Making/Answering Calls
30
For assistance, please visit http://www.panasonic.com/phonehelp
Flash time
The flash time depends on your
telephone exchange or host PBX. You
can select the following flash time: 80
ms, 100 ms, 200 ms, 300 ms, 400 ms,
500 ms, 600 ms, and 700 ms.
The default setting is “600 ms”.
I
mpor
t
an
t
:
LMake sure that the unit is in standby
mode.
1 Press {MENU/SET}.
2 Select “Phone Setup”, then press
{MENU/SET}.
3 Select “Flash Time”, then press
{MENU/SET}.
4 Select the desired setting, then press
{MENU/SET}.
5 Press and hold {MENU/SET} to
return to standby mode.
N
o
t
e:
LTo return to the previous menu, press
{<}.
LIf you are connected via a PBX, a
longer flash time may be necessary to
use PBX functions (transferring a call,
etc.). Consult your PBX installer for
the correct setting.
Temporary tone dialing (for
rotary/pulse service users)
You can temporarily switch the dialing
mode to tone when you need to access
touch tone services (for example,
answering services, telephone banking
services, etc.).
Press {*} (TONE) before entering
access numbers which require tone
dialing.
Recording a telephone
conversation
You can record your conversation while
on an outside call.
1 During an outside call, press
{REC/ERASE ALL}, then press
{MENU/SET}.
2 To stop recording, press
{MENU/SET} again.
N
o
t
e:
LMany states have imposed regulations
on the manner in which 2-way
telephone conversations may be
recorded, so you should inform the
other party that the conversation is
being recorded. Consult your local
telephone company for further
information.
LRecorded conversations are treated
as new messages.
LTo listen to the recorded conversation,
see “Listening to messages” on
page 60.
LIf the message memory becomes full,
Memory Full” will blink and
recording will stop. Erase unnecessary
messages (see “Erasing a message”
on page 61).
LThe recording time of the telephone
conversation does not have limitation.
LIf there is no sound recorded for a
while, recording mode will end.
Flash Time
Hold Reminder
Handsfree Mode
[V/^]:Scroll
Flash Time
=600 ms
[SET]:Save
[V/^]:Change