Filter
Top Products
Speed Dialer
For assistance, please visit http://www.panasonic.com/phonehelp 37
Erasing a stored entry
I
mpor
t
an
t
:
LMake sure that the unit is in standby
mode.
1 Press {MENU/SET}.
2 Select “Phone Setup”, then press
{MENU/SET}.
3 Select “Speed Dial”, then press
{MENU/SET}.
4 Select “Edit/View SPD”, then
press {MENU/SET}.
5 Press the speed dial button ({1} to
{16}).
OR
Press {LOWER}, then press the
speed dial button ({1} to {16}).
6 Press {ERASE}.
7 Select “Yes?”, then press {ERASE}
or {MENU/SET}.
LTo cancel, select “No?”, then press
{MENU/SET}.
8 Press and hold {MENU/SET} to
return to standby mode.
N
o
t
e:
LTo return to the previous menu, press
{<}.
Calling someone with the
speed dialer
If speed dial preference is set to
“CO Call”
Press the desired speed dial button ({1}
to {16}).
OR
Press {LOWER}, then press the desired
speed dial button ({1} to {16}).
If speed dial preference is set to
“Intercom DSS”
1 Lift the handset or press
{SP-PHONE} or a line button.
2 Press the desired speed dial button
({1} to {16}).
OR
Press {LOWER}, then press the
desired speed dial button ({1} to
{16}).
If speed dial preference is set to
“Preview Memory”
1 Press the desired speed dial button
({1} to {16}).
OR
Press {LOWER}, then press the
desired speed dial button ({1} to
{16}).
LYou can review the entries by
pressing {V} or {^}.
2 Lift the handset or press
{SP-PHONE} or a line button.
➔
Speed Dial
Language
Extension No.
[V/^]:Scroll
➔
Edit/View SPD
SPD Preference
[V/^]:Scroll
Edit/View SPD
Select SPD Key